Diesel Delivery Hose
Diesel delivery hose was developed during the early eighties, as an alternative to expensive rubber hose which was being used for conveying diesel oil through gravity feed lines.
Manufactured from a specially formulated blend balanced PVC/Nitrile compound, with a three layer construction and 24 polyester braid reinforcement which is then heat and chemically bonded.
Working pressures and temperatures
The working pressures quoted within the charts are based on the short term burst pressures calculated at 20°C using a 4-to 1 safety factor. Maximum recommended working temperature is 45°C. At temperatures above 20°C working pressures quoted would be affected. Below -25°C bend radius and flexibility would be affected.
Coil lengths and colours
Diesel Hose is usually supplied in lengths of 50 metres, but other coil lengths are available. Further details may be obtained from our Technical Sales Office. All our range of Hose sizes are available in Black. Various colours of hose can also be supplied subject to a minimum order.
| Part No. | OD | ID | Working Pressure | Burst Pressure 4:1 Factor |
|---|---|---|---|---|
| ADH 1/6 | 1 1/2" | 1" | 60 P.S.I | 240 P.S.I |
| ADH 3/6 | 1 1/4" | 3/4" | 75 P.S.I | 300 P.S.I |
| ADH 1/5 | 1 3/8" | 1" | 60 P.S.I | 240 P.S.I |
ID = Inside diameter
OD = Outer diameter
©2009 Abbey Extrusions Ltd.
Design by Internet Essentials.
Call 01530 416177
to order by phone
